Reported Problems:

One of the biggest challenges we have ever done! An Apple MacBook Pro 13 inch A1278 year 2011 laptop was booked in for repairs. The laptop was soaked with water (lots of water, inside a bag) and was no longer booting up.

The Repairs:

This laptop may have suffered multiple water damages. The mission of rescuing this laptop won’t be an easy ride. More than one part will need to be replaced. For this laptop, after extensive testings, we have determined that its logic board, heatsink and screen need to be replaced.

We first have a look inside this laptop.

Now let’s remove the logic board from the computer. Make sure to disconnect other parts first.

Now we can have a look at the logic board.

Testing has confirmed that this logic board is damaged and will need to be replaced. We can now take out a replacement logic board and replace it.

Here we encounter an unexpected problem. This logic board, for some reason, is different from common MacBook Pro A1278 logic boards, it’s nowhere to be found in the market.

Unable to use the common A1278 logic board, we talked to our suppliers to source for an alternative Apple logic board with the same specs.

Now we have the replacement board, installing it brought up another issue. The board’s heatsink was not compatible and had to be replaced too.

Now we have replaced both logic board and heatsink for this MacBook Pro laptop, next is to replace the screen.

Replacing screen for Apple MacBook Pro unibody laptops is never an easy job. The screen is behind a glass cover, replacing the screen means we need to remove the glass cover first. The glass cover is fragile and may break when you attempt to take it out.

Heat up the glass cover with a heat gun and remove it with a suction cup.

Carefully remove the glass cover and make sure not to damage or burn anything underneath.

Have a replacement glass cover in case you broke the original one. Always wear gloves and safety glasses to avoid injuries.

Now we should have access to the screen.

Let’s replace it with a new screen.

With new screen, new logic board, new heatsink installed, the rest of this job is simpler. Reassemble the laptop and test it out.

The laptop turns on fine and booted into Mac OS X normally. Try out other functions such as wireless, keyboard, touchpad to make sure it’s working properly.

All are working perfectly as they should be. Mission accomplished.

Looking for Apple Mac Repairs?

Does your Apple Mac have the same problem? Check our Apple Mac Repair services and Contact us now for a Free Quote. Pickup and Delivery is available for your convenience.

Reported Problems:

An Apple MacBook Pro Unibody 13-inch laptop was booked in with a strange problem. The laptop screen has lines sometimes, a blur duplicated image appeared on the screen, and the screen blacks out occasionally.

     

After a number of testing, we have determined that both of the laptop screen and LED cable must be replaced. Well preparation is the key for this job because this one will require a lot of time, skills and experience. Available spare parts are essential to complete the job right and important for testing.

Let’s remove the laptop bottom cover.

Let’s remove the laptop battery to stop power to the laptop.

Next, we’ve found that the laptop fan has some dust, let’s quickly clean it out. Using cleaning oil will help if necessary. Use a computer brush to clean out the dust.

     

Now we’ll disconnect LED cable from logic board, disconnect left speakers, then put the laptop to stand on its side.

We will then un-screw both hinges and carefully remove the display panel from bottom casing of the laptop.

Now we’ve got the display panel removed on this MacBook Pro laptop. The most difficult part is not yet to start.

Using a heat-gun, we’ll need to heat up the glass cover on the laptop display, take extra precaution here since over-heating it will cause damages on other parts inside the display. Not enough heat on the other hands will not help.

     

With a suction-cup, lift the glass cover up separating it from the display. Be careful here because the glass cover is fragile and can break easily if you use too much force. This process sometimes may break the glass cover so always make sure to have a replacement one in case.

Once that’s done, we can now remove the laptop screen and pull out its LED cable.

Check the screen details, make sure that you have a compatible screen and LED cable. Install the new screen and connect new LED cable.

Follow the same steps in reversed order to reassemble the laptop.

Now we’ve got an Apple MacBook Pro 13-inch A1278 laptop with new screen, new glass cover (if replaced), new LED cable, with internal fan cleaned. Let’s test it out.

          

So far so good, the problem is fixed and the laptop is working well.

Apple MacBook Pro laptops are designed differently comparing to others, replacing screen on these MACs requires a lot more work to be done.

Looking for Apple Mac Repairs?

Does your Apple Mac have the same problem? Check our Apple Mac Repair services and Contact us now for a Free Quote. Pickup and Delivery is available for your convenience.